Phoebe LED
SKU: SL6264
Phoebe LED Backlit Ceiling Panel 40W 600x600 Daylight TP(b) Rated
- 240V 40W LED Ceiling Panel
- No - Not Suitable for Dimming
- 6000K Daylight colour
- 3200 lumens
- 30,000 hours
Bulk Qty
5+
10+
25+
Price
£27.62
£27.05
£25.62
Discount
3%
5%
10%
Phoebe LED Backlit Ceiling Panel 40W 600x600 Daylight TP(b) Rated
The new Phoebe LED Galanos Arteson 600mm x 600mm backlit LED panel lights are a direct replacement for fluorescent modular fittings, which are commonly found in offices, schools and other workplaces.
This 40W LED panel light emits 3200 lumens of daylight light (6000K), with a wide 110° beam angle to illuminate rooms and corridors as efficiently as possible. Its long 30,000-hour maintenance-free life means that once the LED panel light is installed, it will be years before it needs replacing again.
The panels have a tough yet lightweight white powder coated aluminium frame, designed to match white ceiling grids perfectly.
The Phoebe LED Gananos Atreson LED panel light can be installed in 3 easy ways;
1) In a suspended ceiling you can simply remove a 600x600 ceiling tile, or existing built-in fluorescent fixture, and replace with an LED panel light. This square LED ceiling panel light (actual size 595mm x 595mm x 30mm) is the most common size of LED panel light for installation in suspended ceilings.
2) With a mounting frame, it is possible to mount the LED panel on a flat surface, both against a ceiling and against a wall. Mounting frames are sold separately.
3) Using a suspension set. This consists of a kit with cables to hang on the ceiling. This allows you to determine the ideal height of the LED panel. Suspension kits are sold separately.
Emergency Pack, which are designed and manufactured specifically for the Phoebe LED Galanos Arteson LED panels, are also available. These provide over 3 hours of maintained light output without the additional expense and inconvenience of separate emergency lighting.
Please note, this panel is not suitable for dimming.
General | |
---|---|
Manufacturer | Phoebe LED |
MPN | 14497 |
Barcode | 5055579314497 |
Shape | Ceiling Panel |
Dimmable | No - Not Suitable for Dimming |
Light Source | LED Integrated |
Manufacturer's Warranty | 5 Years |
Dimensions | |
---|---|
Width | 595mm |
Depth | 30mm |
Length | 595mm |
Weight | 1.63Kg |
Light Output | |
---|---|
Total Lumens | 3200lm |
Beam Angle | 110° |
Lumen Maintenance Factor | 0.36 |
Warm Up Time | <0.5 seconds (0-60%) |
Light Colour | |
---|---|
Colour Temperature | 6000K |
Colour Description | Daylight |
Housing | |
---|---|
Glass Type | Diffused TP(b) Rated |
Material | Aluminium / Polycarbonate |
Finish | White |
Ingress Protection Rating | IP20 |
Mercury Content | 0.0mg |
Appliance Class | II |
Safety Class | Double Insulated |
Life Span | |
---|---|
Average Rated Life (L50) | 30,000 hours |
Switching Cycles | 60,000 |
Estimated Life Expectancy | 16 Years |
Power | |
---|---|
Voltage | 240V |
Power Consumption | 40W |
Estimated Running Cost | £16.32 per year based on 5-hours per day @ Jun 24 Price Cap (22.36p/kWh) |
Here at SimplyLED, we want you to be able to buy with confidence both in ourselves and the products we sell. With this in mind, a number of our LED fittings carry a specific warranty that ensures you can do exactly that.
Any Phoebe LED fitting bought from SimplyLED carries a 24-month warranty.
If you should purchase a Phoebe LED fitting from SimplyLED and have it fail, break or develop a fault at any point within the timeline stated above from the date of purchase, we will happily replace the item or offer a full refund, depending on your wishes.
In instances where large numbers of products fail within a relatively short period of time, we may ask you to return them to us so that they can undergo testing to identify any potential issues.
Manufacturers Warranty
This product is also covered by a manufacturer's warranty for a period of 5 years from date of purchase. Please visit the manufacturer's website for further details.
What doesn't our warranty cover?
In any instance where your product has developed a fault, we will do our utmost to replace it or offer a full refund (provided the item is still within its stated warranty period). However, if it becomes apparent that the product has been misused, tampered with or modified in any way, we will view this as having voided its warranty.
'Misuse" includes, but is not limited to, incorrect operation by the user, use of non-dimmable products on a dimmable circuit or connection to or operation with an unsuitable power supply. 'Tampering' or 'modification' can be interpreted as any activity designed to alter the product in such a way that it can be used in a manner that wasn't intended by its original design. This can include rewiring, removing plugs, home repairs or changing components. Unfortunately, we won't be able to replace any item that has undergone any such process.
If you have any further questions about our Warranty or Returns Policy that aren't addressed on this page, please feel free to contact us.