Skip to main content

Phoebe LED

SKU: SL6074-5

Phoebe LED Downlight Fire Rated 8.5W (50W Eqv) Tri-Colour CCT White and Brushed Nickel IP65 5-Pack

0 review Write a Review
  • Pack of 5x fire rated downlights with insulation guards
  • Includes white and brushed nickel bezels
  • Tri-Colour selection switch for warm white, cool white or daylight colour
  • IP65 rated for bathroom use
83%Estimated Energy Saving
27 YearsEstimated Life Expectancy
£4.44Estimated Running Cost
£21.68Estimated Cost Saving
Was £74.05
Now £66.65
Hurry up! Current stock:

Phoebe LED Downlight Fire Rated 8.5W (50W Eqv) Tri-Colour CCT White and Brushed Nickel IP65 5-Pack

Was £74.05
Now £66.65

A value pack of 5x Phoebe LED Firesafe All-in-One Integrated LED Downlights, a versatile lighting solution that will revolutionize your indoor space.

This all-in-one IP65 fire-rated LED downlight features a front-facing tri-colour selection switch (behind the front bezel) and provides a smooth, dimmable operation. With a 60° beam angle and flicker-free light output, you can enjoy a seamless lighting experience for any room including bathrooms and kitchens.

The Phoebe LED downlight comes with two stylish interchangeable bezels in white and brushed nickel effect. The bezels are held in place magnetically and can be simply popped-off and easily changed to match your décor.

Additionally, each LED downlight includes a constant current driver for high performance that features a loop-in/loop-out tool-less wiring connector for easy installation.

The tri-colour selection switch allows you to change the light colour between 3000K warm white, 4000K cool white, or 6500K daylight colour temperature, making it easy to customise your lighting to suit your mood or occasion.

Thanks to DuoDim™ Technology, this product is fully dimmable and compatible with a wide range of leading and trailing edge dimmers.

Fire rated downlights are designed to protect against the spread of fire by maintaining the ceiling's fire resistance. To achieve this, they have a built-in intumescent material that expands when exposed to heat, effectively sealing the hole cut into the ceiling. However, if insulation is placed over the fitting, it can reduce the downlight's ability to dissipate heat and potentially cause the intumescent material to fail.

This is where the in-built insulation guards of the Phoebe LED Firesafe All-in-One Integrated LED Downlight come in. They help maintain an air-pocket around the fitting to allow for heat dissipation, ensuring the downlight's fire rating is not compromised while allowing you to insulate your ceiling for energy efficiency.

The Phoebe LED downlight has a IP rating of IP65, making it suitable for use in bathroom zones 1-2 and other humid conditions. With a 50,000 hour life and 100,000 switching cycles, it is built to last. Its 60° beam angle, 3000K, 4000K, and 6500K tri-colour select colour temperature, and high colour rendering index it is a reliable and versatile lighting solution.

This product is part L compliant of UK Building Regulations and BS476 Parts 21 and 22, making it suitable for use in 30 minute 600mm/15mm single layer standard wallboard, 60 minute 600mm/12.5mm twin layer fibreboard, and 90 minute 450mm/15mm twin layer fireboard ceilings.

This recessed downlight requires a cut-out dimension with a diameter between 70-72mm.

With a power consumption of 8.5W and equivalent to 50W halogen GU10, this Phoebe LED downlight is energy-efficient and cost-effective. It has very low energy consumption and supplies instant start 100% light with no warm-up time.

Experience the Phoebe LED Firesafe All-in-One Integrated LED Downlight and elevate your ceiling lights today! With a manufacturers 5-year warranty, you can be assured of its quality and durability.

General
ManufacturerPhoebe LED
MPN12639
Barcode5055579312639
ShapeDownlight
DimmableYes - Dimmable
Light SourceLED Integrated
Manufacturer's Warranty5 Years
Dimensions
Diameter89mm
Height65mm
Cutout Dimensions70-72mm
Weight0.29Kg
Light Output
Total Lumens700lm
Useful Lumens650lm
Beam Angle60°
Lumen Maintenance Factor0.96
Warm Up Time<0.5 Seconds (0-60%)
Light Colour
Colour Temperature3000K and 4000K and 6000K
Colour DescriptionTri-Colour CCT
Colour RenderingRA >80
Housing
MaterialDie-cast Aluminium
FinishWhite and Brushed Nickel
Ingress Protection RatingIP65
Mercury Content0.0mg
Life Span
Average Rated Life (L50)50,000 hours
Switching Cycles100,000
Estimated Life Expectancy27 Years
Power
Voltage240V
Power Consumption8.5W
Equivalent Wattage50W Halogen GU10
Estimated Running Cost£4.44 per year based on 5-hours per day @ Jan 24 Price Cap (28.62p/kWh)
Estimated Equivalent Running Cost£26.12 per year based on 5-hours per day @ Jan 24 Price Cap (28.62p/kWh)
Estimated Running Cost Saving£21.68 per year based on 5-hours per day @ Jan 24 Price Cap (28.62p/kWh)
Estimated Energy Saving83%

Here at SimplyLED, we want you to be able to buy with confidence both in ourselves and the products we sell. With this in mind, a number of our LED fittings carry a specific warranty that ensures you can do exactly that.

Any Phoebe LED fitting bought from SimplyLED carries a 24-month warranty.

If you should purchase a Phoebe LED fitting from SimplyLED and have it fail, break or develop a fault at any point within the timeline stated above from the date of purchase, we will happily replace the item or offer a full refund, depending on your wishes.

In instances where large numbers of products fail within a relatively short period of time, we may ask you to return them to us so that they can undergo testing to identify any potential issues.


Manufacturers Warranty

This product is also covered by a manufacturer's warranty for a period of 5 years from date of purchase. Please visit the manufacturer's website for further details.


What doesn't our warranty cover?

In any instance where your product has developed a fault, we will do our utmost to replace it or offer a full refund (provided the item is still within its stated warranty period). However, if it becomes apparent that the product has been misused, tampered with or modified in any way, we will view this as having voided its warranty.

'Misuse" includes, but is not limited to, incorrect operation by the user, use of non-dimmable products on a dimmable circuit or connection to or operation with an unsuitable power supply. 'Tampering' or 'modification' can be interpreted as any activity designed to alter the product in such a way that it can be used in a manner that wasn't intended by its original design. This can include rewiring, removing plugs, home repairs or changing components. Unfortunately, we won't be able to replace any item that has undergone any such process.


If you have any further questions about our Warranty or Returns Policy that aren't addressed on this page, please feel free to contact us.

Customers Also Viewed

Review Your Cart Close Close
Your cart is empty