Phoebe LED
SKU: SL6473
Phoebe LED Batten 4ft 20W Tri-Colour CCT Microwave Sensor Lykos Light Grey
- 240V 20W LED Batten
- No - Not Suitable for Dimming
- 3000K and 4000K and 5700K Tri-Colour CCT colour
- 2000 lumens
- 50,000 hours
Bulk Qty
5+
10+
25+
Price
£29.85
£29.23
£27.69
Discount
3%
5%
10%
Phoebe LED Batten 4ft 20W Tri-Colour CCT Microwave Sensor Lykos Light Grey
The Lykos 4ft integrated LED batten light has been designed as a direct replacement for single T5 and T8 linear outdoor fluorescent luminaires. Consuming only 20w to provide 2000 lumens, this single LED non-corrosive fitting is an ultra-energy-efficient choice for industrial environments such as garages, public car parks, workshops and food preparation areas which require tough, weatherproof fittings.
The integrated microwave and dusk-til-dawn sensor automates the lighting function of the fitting when the presence of motion is detected. With sufficient ambient light, the batten will not switch on even when motion is detected. When there is insufficient ambient light the fitting will switch on when motion is detected - after the hold time has elapsed the light will switch off if no more motion has been detected. The sensor has easy access to adjust daylight threshold settings, hold time (up to 30 minutes) and sensitivity of detection. The sensor can be overridden by switching the power to the fitting on/off 3 times.
This Lykos single LED batten light comes with a 20W integrated LED strip with a 50,000 hour rate life, meaning it will be years before the fitting will need to be replaced while also removing the need for maintenance, subsequently lowering costs.
The tri-proof fitting is constructed from an IK08 impact rated moisture and acid-resistant ABS body with polycarbonate diffuser. With an IP65 rating, it is suitable for indoor and outdoor use making it ideal use in areas where a tough robust led batten light is required. The stainless steel anti-tamper clips mean that this fitting is also vandal proof.
Installation is simple thanks to the two loop-through continuous feed terminal blocks (with continuous live feed). This saves an incredible amount of time, especially with projects requiring multiple fittings to be installed, as the loop-in/loop-out terminals make it possible to wire directly from fitting-to-fitting.
Another great feature is the colour changing technology (CCT), which allows you to select from warm white, cool white or daylight light outputs. Simply pre-select the colour temperature that you desire before installation.
The Phoebe Lykos LED batten light fitting is suitable for conduit, surface, or suspension mounting.
General | |
---|---|
Manufacturer | Phoebe LED |
MPN | 14749 |
Barcode | 5055579314749 |
Shape | Batten |
Dimmable | No - Not Suitable for Dimming |
Length | 4ft |
Light Source | LED Integrated |
Manufacturer's Warranty | 5 Years |
Dimensions | |
---|---|
Width | 80mm |
Depth | 72mm |
Length | 1200mm |
Weight | 1.3Kg |
Light Output | |
---|---|
Total Lumens | 2000lm |
Beam Angle | 120° |
Lumen Maintenance Factor | 0.96 |
Warm Up Time | <0.5 seconds (0-60%) |
Light Colour | |
---|---|
Colour Temperature | 3000K and 4000K and 5700K |
Colour Description | Tri-Colour CCT |
Colour Rendering | RA >80 |
Housing | |
---|---|
Glass Type | Diffused |
Material | Polycarbonate |
Finish | Light Grey |
Ingress Protection Rating | IP65 |
Sensor Type | Microwave Sensor |
Mercury Content | 0.0mg |
Life Span | |
---|---|
Average Rated Life (L50) | 50,000 hours |
Switching Cycles | 100,000 |
Estimated Life Expectancy | 27 Years |
Power | |
---|---|
Voltage | 240V |
Power Consumption | 20W |
Estimated Running Cost | £8.16 per year based on 5-hours per day @ Jun 24 Price Cap (22.36p/kWh) |
Here at SimplyLED, we want you to be able to buy with confidence both in ourselves and the products we sell. With this in mind, a number of our LED fittings carry a specific warranty that ensures you can do exactly that.
Any Phoebe LED fitting bought from SimplyLED carries a 24-month warranty.
If you should purchase a Phoebe LED fitting from SimplyLED and have it fail, break or develop a fault at any point within the timeline stated above from the date of purchase, we will happily replace the item or offer a full refund, depending on your wishes.
In instances where large numbers of products fail within a relatively short period of time, we may ask you to return them to us so that they can undergo testing to identify any potential issues.
Manufacturers Warranty
This product is also covered by a manufacturer's warranty for a period of 5 years from date of purchase. Please visit the manufacturer's website for further details.
What doesn't our warranty cover?
In any instance where your product has developed a fault, we will do our utmost to replace it or offer a full refund (provided the item is still within its stated warranty period). However, if it becomes apparent that the product has been misused, tampered with or modified in any way, we will view this as having voided its warranty.
'Misuse" includes, but is not limited to, incorrect operation by the user, use of non-dimmable products on a dimmable circuit or connection to or operation with an unsuitable power supply. 'Tampering' or 'modification' can be interpreted as any activity designed to alter the product in such a way that it can be used in a manner that wasn't intended by its original design. This can include rewiring, removing plugs, home repairs or changing components. Unfortunately, we won't be able to replace any item that has undergone any such process.
If you have any further questions about our Warranty or Returns Policy that aren't addressed on this page, please feel free to contact us.